You must have once dreamt of using your basement as a fully fledged living space. But then, there is the headache of getting water out of it. Basements are always placed below the primary sewer line. So, common plumbing options are often difficult and expensive to fix or install in them. The Saniflo basement drainage system is a simplified, cost-friendly, and easy system for homeowners wanting to use their toilets, sinks, or the whole bathroom downstairs.
In the following blog post, we see how the Saniflo Basement Drainage System works, its advantages, the installing process, and why it would be a smart choice for your household.
What is a Saniflo Basement Drainage System?
Saniflo basement drainage is a macerating system that is intended to address the issue of wastewater in the basement, where there is no proper way to make use of a gravity-based plumbing system. Since gravity cannot be depended upon to propel wastewater to the main sewer line, the wastewater gets pumped through the macerator, breaking it up into fine particles, and then further up through the pipe to reach the main sewer line or the septic tank.
This innovative solution allows for the installation of bathrooms, laundry rooms, or kitchens in areas below the main plumbing line without extensive renovations or costly excavation work.
Key Features of the Saniflo Basement Drainage System
Compact and Space-Saving
The Saniflo system was designed to easily fit into tiny spaces, fitting well with compact basement layouts. Because of this design, you can create a maximum utilization of the usable area that you have in your basement with no compromise at all.
Inaudible System
Mostly, the homeowner is apprehensive about a macerating pump because it will be noisier. Hence, the basement drainage system engineered by Saniflo is an inaudible system, which offers minimum disturbance to peaceful living in homes.
The system can accommodate a variety of fixtures, including toilets, sinks, showers, and washing machines. This versatility allows homeowners to create custom layouts that meet their specific needs.
Easy Installation
In the Saniflo system, no concrete breaking will be required; it merely mounts above the floor, making installation a little faster and cheaper.
Benefits of the Saniflo Basement Drainage System
1. Economical Solution
The basement conventional drainage system is accompanied by the digging process to create a gravity slope facilitating drainage. Time and money are wasted in the process. This is not the case with the Saniflo basement drainage system that doesn’t require digging, hence saving you time and money.
2. Flexibility in Design
With a Saniflo system, you are not limited by the location of existing plumbing. You can place your bathroom or kitchen wherever it suits your basement design. The system’s pumping capabilities allow for greater freedom in layout planning.
3. Quick Installation
The Saniflo system only requires installation in a small fraction of the time it takes for the setup of a traditional plumbing system. It, therefore, means that you would be able to enjoy your basement space quickly.
4. Least Disturbance
There is no digging involved, so installation is less invasive. This is quite advantageous, especially if you are staying in the house during renovation.
5. Eco-Friendly
Saniflo systems are designed to use less water than traditional systems. This not only reduces water consumption but also lowers your utility bills, making it an eco-friendly option.
How Does the Saniflo Basement Drainage System Work?
The Saniflo basement drainage system is built around a macerating pump:
Waste Entry
Wastewater from your toilet, sink, or other fixtures enters the Saniflo unit.
Maceration
Inside the unit, a blade-powered macerator chops solid waste and toilet paper into a fine slurry. The slurry makes it easy for the waste to flow through small pipes.
Pumping
The slurry is forced upward by a macerating pump through a small-diameter discharge pipe. The pipe leads into the main sewer line or septic system.
Drainage
Once the waste has reached the main plumbing system, it flows away like in a regular system.
Installation Process
This Saniflo basement drainage system is easier to install than a regular plumbing system. Here’s how it goes:
Select the Installation Location
Decide where you are going to locate your bathroom or fixtures. Since Saniflo is flexible, you are not restricted to the location where the existing plumbing lines are found.
Mount the Unit
Locate the macerating pump behind the toilet or in another hidden location. Make sure that it is placed level and tight.
Fixing the Fixtures
Hook up the toilet, sink, shower, etc. to the Saniflo system. Saniflo equipment comes with attached instructions on the connection of its parts.
Installation of the Discharge Pipe
Run a small-diameter discharge pipe from the Saniflo unit to your home’s main sewer line. The pipe can be routed vertically or horizontally, depending on your layout.
Electrical Connection
Plug the unit into a standard electrical outlet. The system’s low power consumption ensures it won’t significantly impact your energy bills.
Test the System
Test the system after connecting all parts. Water all the fixtures and inspect for leaks.
Conclusion
The Saniflo basement drainage system is a game-changer for homeowners who want to utilize their basements to their full potential. By eliminating the need for costly and disruptive excavation, this innovative system makes it easier than ever to add functional spaces below ground level. With its compact design, quiet operation, and eco-friendly features, the Saniflo system is a smart investment for any home.